If you're ready to race, read this article to discover how to activate D-BOX haptic in Gran Turismo 7!
|
Note: Although Gran Turismo is a PS5 console game, D-BOX haptics can be enabled only using a PC. It cannot be enabled using a HEMC or a HaptiSync Hub. See detailed instructions below. |
|
| 1. |
ACCOUNT & SUBSCRIPTION (1st time only) If not already done, create your D-BOX Connect account. |
| 2. |
SOFTWARE DOWNLOAD (1st time only) If not already done, download and install the latest version of D-BOX HaptiSync Center Software. It is available in the Software Downloads section of our website. If you have a Motion 1 chair and have installed Master Plus already, you can skip this step. |
| 3. |
ACTIVATION (1st time only) Make sure your computer is activated and linked to your D-BOX Connect account using HaptiSync Center. |
|
4. |
Open HaptiSync Center. |
|
5. |
LOG IN When prompted, login to your D-BOX Connect account.
|
| 6. |
In the HaptiSync Mode section, set the HaptiSync Mode to D-BOX Coded Gaming.
Click Library to access the gaming haptic code library and select Gran Turismo 7 to install the haptic code.
|
| 7. |
Take note of your PlayStation's IP Address. It can be found in Settings -> Network -> Connection Status. It MUST be connected to a network. |
| 8. |
Start Gran Turismo 7 and make it all the way to the start of a race with control. Pause the game. |
| 9. |
On your Windows PC, select Gran Turismo 7 in the game library and click on Haptic Settings & Profile Selection.
Enter your PlayStation's IP Address and click Save All.
|
| 10. |
Go back in HaptiSync Center and click on Launch to launch the game and activate the haptic code of your game. D-BOX hardware will initialize and render haptic feedback while the user has vehicle controls.
|
